Orbitus RoboticsR.O.B. 2021Visual archiveR.O.B. development in 2021Showing 12 of 14 media itemsPhoto 1Photo 2Photo 3Photo 4Photo 5Photo 6Photo 7Photo 8Photo 9Photo 10Photo 11Photo 12Photo 13Photo 14 Show 2 moreJavaScript is disabled. Open the optimized media files directly:Photo 1: Open rear electronics bay and left arm of the tracked robot, with loose wiring visible inside.Photo 2: Slightly closer rear view of the robot's open wiring compartment beside its geared shoulder joint.Photo 3: Spherical multicamera head mounted above the robot's exposed electronics bay and left shoulder assembly.Photo 4: Close framing of the open electronics bay, loose red wiring, and vertically hanging left arm.Photo 5: High rear angle showing the spherical camera, open wiring compartment, and left arm beside the chassis.Photo 6: Right-side view of the robot enclosure with a braided cable loop connecting the shoulder and arm.Photo 7: Rear three-quarter view of the black enclosure, curved braided conduit, arm actuator, and tank tread.Photo 8: Wider rear view of the robot's cable loop, side enclosure, jointed arm, and tracked base.Photo 9: Upper electronics compartment with loose colored wires beneath a shoulder gear and partially cropped camera head.Photo 10: Rear view of the enclosed robot body and left arm beside the tank tread and motor.Photo 11: Low side view showing the robot's tread, exposed cabling, black enclosure, and arm hardware.Photo 12: Tightly cropped lower side of the enclosure with wiring, a tread, and part of the arm actuator.Photo 13: A hand beside a braided cable loop and toothed shoulder gear inside the robot housing.Photo 14: Cropped person standing beside the robot's exposed top wiring and a circular component resting forward.R.O.B. development in 2021ClosePrevious Next
