ROB 2022 | Orbitus Robotics

Orbitus Robotics Apple-native robotics

Maker Faire About Contact

ROB 2022 gallery cover

JavaScript is disabled. Open the optimized media files directly:

Photo 1: Fanless black mini computer with labeled USB cables and serial ports on a cluttered workbench.

Photo 2: Tracked robot with articulated arms and a temporary chest enclosure decorated with blue painter's tape.

Photo 3: Low side close-up of the robot's gray temporary chest enclosure and crumpled blue tape features.

Photo 4: Frontal close-up of the robot's temporary chest enclosure covered with gray and blue painter's tape.

Photo 5: Hand holding looped power and data cables attached to two cylindrical rotary connectors beside a laptop.

Photo 6: USB and power cables surround a flanged rotary connector resting beside a laptop and metal bracket.

Photo 7: Young child holding a snack beside a black humanoid robot in a cluttered living room.

Photo 8: Front view of the tracked robot with a white chest panel and both articulated arms raised among toys.

Photo 9: Close frontal view of the robot's spherical camera head, glowing green light, twin speakers, and raised arms.

Photo 10: Full frontal robot with twin speakers, exposed chest wiring, extended arms, and a tracked base.

Photo 11: Wide living-room view of the tracked robot, with children partially visible behind its extended arms.

Photo 12: Seated man holding a mug beside the partially assembled humanoid robot in a cluttered workshop.

Photo 13: Closer framing of a man holding a mug beside the robot, with shelves of electronics behind them.

Photo 14: Smiling man leans beside the robot while holding a mug in the electronics-filled workshop.

Photo 15: Top-down close-up of wiring, a motor, and wooden mounting pieces inside the robot's tracked chassis.

Photo 16: Wider overhead view into the tracked chassis showing wiring, a cylindrical motor, and mounting hardware.

Photo 17: Close-up of red and black motor wiring beside a U-shaped metal bracket inside the chassis.

Photo 18: Angled view of the robot's rear drive panel, bolts, cable, and motor housing beside one tread.

Photo 19: Centered rear close-up of the drive assembly, motor, cable, mounting bolts, and two tank treads.

Photo 20: Low rear view of the motor and bolted drive assembly positioned between the robot's tank treads.

Photo 21: Flash-lit side view of the robot's articulated arm joints mounted beside a black body enclosure.

Photo 22: Dark lower-angle view of the arm's rotary joints, wooden mounting plate, and small status lights.

Photo 23: Dim close-up of the robot's upper arm joints and side enclosure with a workstation beyond.

Photo 24: Wider dark view of both upper arm assemblies, the spherical head silhouette, and a blue monitor.

Photo 25: Dim overhead view of the tracked chassis, drive motor, exposed frame, and one mounted arm.

Photo 26: Dark side view of the robot's blue-covered torso with articulated arms flanking the enclosure.

Photo 27: Out-of-focus frontal close-up of the spherical camera head and articulated shoulder mechanisms.

Photo 28: Flash-lit upper view of the camera head, twin shoulder joints, wooden arm plates, and neck gearing.

Photo 29: Dark frame containing scattered red, green, and blue points of light.

Photo 30: Angled full view of the tracked robot with green ring eyes, connected cables, and a curled dog behind.

Photo 31: Front upper-body view of the robot's green ring eyes and articulated arms in a cluttered workshop.

Photo 32: Tracked base with mounted monitor and tablet, cables across the carpet, and a curled dog behind.

Photo 33: Small MakerBro monitor between the robot's arms displaying a dark software interface.

Photo 34: MakerBro monitor between the robot's arms displaying a lake-and-mountain desktop wallpaper.

Photo 35: Close-up of the MakerBro monitor displaying an Ubuntu file manager with several media files.

Photo 36: Circular black circuit board with dense electronic components, printed labels, and yellow connectors.

Photo 37: Circular circuit board beside a gray joint bearing a hand-drawn face and handwritten note.

Photo 38: Wider view of the marked gray joint and attached circular circuit board amid the arm hardware.

Photo 39: Close-up of the back of a round black circuit board with dense components and yellow connectors.

Photo 40: Tracked humanoid robot posed outdoors beside an R2-D2 replica, with people reflected in windows.

Photo 41: Two masked costumed adults holding illuminated purple and blue prop swords behind the robot outdoors.

Photo 42: Convention display with costumed adults, a forest backdrop, helmet props, and the tracked robot at left.

Photo 43: Hooded masked costumed person holding a glowing red prop sword beside the robot and helmet display.

Photo 44: Closer view of a hooded masked costumed person with a red prop sword and forest backdrop.

Photo 45: Full-body hooded costumed person holding a glowing red prop sword beside the robot and display helmets.

Photo 46: Hooded costumed person raises a glowing red prop sword before a group and helmet display.

Photo 47: Group of costumed people behind helmet props, with the robot and a raised red prop sword in front.

Photo 48: Bay Area Festivals business card lying on beige carpet beside a black strap.

Photo 49: Boxed GlideForce medium-duty linear actuator on a workbench with loose bolts and hardware.

Photo 50: Hand holding a black steel bracket above the robot's open chassis and exposed wiring.

Photo 51: Metal mounting plate labeled To Wood positioned over the robot's chassis wiring.

Photo 52: Power drill aligned over a bolted metal rail clamped to a red workbench.

Photo 53: Closer angle of a drill driving a bolt through overlapping metal rails on a red support.

Photo 54: Aluminum cable clamp mounted inside the robot base among red, black, and gray wiring.

Photo 55: Angled close-up of a newly mounted metal clamp and upright bracket inside the chassis.

Photo 56: Centered front view of the bracket assembly secured to a black chassis plate amid wiring.

Photo 57: Side view of the rear drive assembly with motor, bracket, cable, and tank tread.

Photo 58: Low interior view of the tracked chassis showing a large sprocket, chain, and support bars.

Photo 59: Angled overhead view of the tracked base with gray motor, coiled braided hose, and metal fittings.

Photo 60: Front view of the tracked base with coiled hose and motor centered between the treads.

Photo 61: Close side view of a tank tread, gray motor, bolted bracket, and braided cable.

Photo 62: Low floor-level view past a bent knee toward the robot silhouetted against a curtained window.

Photo 63: Low floor-level view of the robot at a bright curtained window beneath a textured ceiling.

Photo 64: Backlit silhouette of the tracked robot in a dim room framed by a window and furniture.

Photo 65: Compact camera assembly mounted on a worn blue box beside a sunlit window.

Photo 66: Front upper view of the robot's antennaed spherical head, twin speakers, exposed wiring, and raised arm.

Photo 67: Three-screen coding workstation with a laptop, electronics, and a resting dog beneath the desk.

Photo 68: Black OAK-D Pro Wide camera box leaning against a reflective surface on carpet.

Photo 69: Top-down close-up of a black stereo depth camera with three blue-ringed lenses on wood.

Photo 70: Dim angled close-up of a connected depth camera and cables inside the robot chassis.

Photo 71: Dark frontal view of the robot illuminated by two blue ring lights and a green status light.